There’s nothing like an impending floor installation to really jump start some action. With the install date for our floors only a week away, we knew we had to get our painting caps on. Painting is so much easier when you don’t care about spills and drips. And given that we had to paint EVERY SINGLE WALL, CEILING, AND PIECE OF TRIM in the whole house, we wanted to make it as easy on ourselves as we could. Now, we thought about hiring it out, but after getting estimates that ranged from $2,500 to $3,500, we opted to just do it ourselves. Plus, that way we knew it would be done right. So we got our ventilator masks and got after it.
Everything had to be primed first, including the ceiling (our contractor Steve had patched some of the settling cracks in the ceiling, so primer was a necessity). Here are some before-painting shots to remind you of where we were at:
We started with primer everywhere. I did all the brush work and Mr. handled the rolling.
The ceilings were the hardest part, but Mr. did a fantastic job (I offered to help and I offered a pole but he said it was easier his way). After a couple long days, everything was primed and ready for paint.
You might be able to tell from some of those pictures that a paint sprayer was attempted at one point. I say attempted because it was sort of a fail. I wasn’t around for it, but I saw the aftermath and it wasn’t pretty–lots of drips and spurts combined with spots of too much paint and spots of too little. In the end, Mr. Bunches decided it was a big time and money suck. Lesson learned.
After the priming, it was time to paint. After much trolling of Pinterest to find the perfect greige to paint the whole house, I decided on Benjamin Moore’s Classic Gray. (Image sourced from Jennifer Pacca Interiors.)
In an attempt to save some money, I decided to buy the paint from Home Depot and just get it color matched (I think HD used to have all of BM and SW colors in their computers, but they no longer do. That meant that they used my little paint chip to color match it).
It looks a little more beige than gray there, but all the pictures I found on Pinterest, and well, the name itself made me feel pretty confident that this was the warm gray I was going for. And then we started putting it on the walls. Cue the dramatic music and drumroll . . .
Those two pictures make it look very beige, but in real life it read as a very sickly yellow. Totally not my style. And totally not Classic Gray–my own fault for trying to get it color-matched at HD. So basically it was a complete waste of $100 (that’s how much the five-gallon bucket of paint cost) and two hours of precious painting time (that’s the total amount of time it took me to go to a Benjamin Moore store and get new paint).
With the epic paint fail, I decided to take that opportunity to rethink my color choice altogether. I knew that I wanted it to look gray and not just read gray in certain lights. So I went with BM’s Gray Owl. We used it in our own master bathroom (although lightened by 50%) and I knew it looked great. Plus, turns out it’s Benjamin Moore’s second most popular gray (after Revere Pewter), so I knew it would be good. (Below image from Fabulously Vintage.)
I didn’t have time to wait for the paint to dry before snapping these progress shots so there are still a few wet spots in those pictures. Forgive me. And these are most definitely progress shots. Oh, and the paint isn’t 100% Gray Owl. I had it lightened by 25%. Why? Well, the house isn’t that bright, and–let’s be real–it’s also in Buffalo where the sun forsakes us for six months each year, so I didn’t want to go too dark with the walls. I think it’s going to work out great. Now if only we can finish it all before the floors go in . . .